Connect the base unit – Sony SPP-S9001 Manuel d'utilisation
Page 4
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Connect the base unit
If you want to hang the base unit on the wall, see "Mounting the base unit on a wall”
To AC outlet
'AC power adaptor
(supplied AC-T123)
Telephone line cord
(supplied)
To LINE
To telephone outlet
1
Connect the telephone line cord to the LINE jack and to a telephone outlet.
2
Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet.
3
Raise the antenna. Make sure it points toward the ceiling.
Notes
• Use only the supplied AC-T123 AC power adaptor. Do not use
any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the base unit close to the AC outlet so that you can
unplug the AC power adaptor easily.
Tip
If your telephone outlet is not modular, contact your telephone
service company for assistance.
Polarity of the plug
Modular