Sony CPJ-A300 Manuel d'utilisation
Color lcd projector
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Advertising
Table des MATIÈRES
Document Outline
- Color LCD Projector
- Owner's record
- CAUTION
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- CAUTION
- Table of contents
- Welcome
- Precautions
- Selecting the projecting location
- Preparations
- Projecting
- Turning on the projector
- 1 Press POWER of the control panel.
- The ON/STANDBY indicator turns green. The LAMP indicator starts flashing.
- The bulb lights up and the projected plane appears.
- 2 If necessary, adjust the position of the projected plane using the stand.
- ® Unlock the stand.
- @ Adjust the position.
- Projecting (continued)
- To stabilize projector
- Using the AV Cordless IR system - LASER LINK
- Position the IR transmitter and the IR receiver of the projector so that they operate effectively.
- 1 Press POWER of the IR transmitter (m ON).
- 2 Press LASER LINK to turn on the LASER LINK indicator.
- The LASER LINK indicator lights up in red and "LASER LINK" appiears at the top left comer of the screen.
- The display will go off after 5 seconds.
- Projecting (continued)
- Adjusting the focus
- Using the headphones
- Turning off the projector
- Turning on the projector
- Adjusting the picture
- Maintenance
- Specifications
- Identifying the parts
- Troubleshooting
- The ON/STANDBY indicator keeps flashing.
- "TEMPERATURE" is displayed.
- "FAN" is displayed.
- The projector does not turn on.
- No picture is projected.
- No picture is projected because the POWER button
- is pressed while the LAMP indicator is flashing.
- The picture is dark.
- The picture is unclear.
- The picture is distorted.
- The picture is noisy.
- No sound
- The projector is warm.
- . Constant bright points of light (red, blue, or green)
- appear on the screen.
- Table des matières
- Félicitations
- Précautions
- Sélection de la position de projection
- Préparation
- Projection
- Réglage de l'image
- Entretien
- Spécifications
- Identification des composants
- Dépannage