Sony XM-430 - Manuel (Page 15)

Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
50 (30)* watts per channel minimum continuous average power into
4 ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee
standards.
*(XM-430)
Other Specifications
Circuit system OTL (output transformerless)
circuit
pulse power supply
Inputs RCA pin jacks
Outputs Speaker terminals
Speaker Impedance
2-8 ohms (stereo)
4-8 ohms (when used as a
bridging amplifier)
Maximum output
100 (60)* W per channel with
4-speaker system (at 4 ohms)
100 W X 2 + 260 W X 1 (60 W X 2
+ 150 W X 1)* with 3-speaker
system
260 (150)* W per channel with
2-speaker system (at 4 ohms)
Rated outputs (supply voltage at 14.4 V)
50 (30)* W per channel with
4-speaker system (20 Hz - 20
kHz, 0.04 % THD, at 4 ohms)
65 (40 )* W per channel with
4-speaker system (20 Hz - 20
kHz, 0.1 7a THD, at 2 ohms)
130 (70)* W per channel with
2-speaker system (20 Hz - 20
kHz, 0.1 7o THD, at4 ohms)
Frequency response
5Hz-100kHz(*;dB)
Harmonic distortion
0.005 7<> or less
(at IkHz, 4 ohms)
Input level adjustment range
0.2-2 V
High-pass filter (INPUT A, B, C and D)
80 Hz, -12 dB/oct
Low-pass filter for subwoofer (INPUT A, B, C and D)
80 Hz, -18 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5-16 V
Current drain at rated output; 26 (18)* A
Remote input: 5 mA
Dimensions Approx. 219 x 56 x 310 (260)*
mm (w/h/d)
(8Vsx2 V4xl2V4(10'/4)* in.)
not inch projecting parts and
controls
Mass Approx. 3 kg (6 lb. 9 oz.) (2.5 kg
(5 lb. 8 oz))* not inch accessories
Supplied accessories
Mounting screws (x 4)
Optional accessories
Connecting cord for power
amplifier RC-46
RCA pin cord RC-64 (2 m)
RCA pin cord RC-65 (5 m)
*(XM-430)
Design and specifications are subject to change
without notice.