Entering new timings, Power saving function, Use of the tilt-swivel – Sony CPD-1303 Manuel d'utilisation
Page 36
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Entering New Timings
When using a video mode that does not match one of the 9
factory preset modes, some fine tuning may be required to
optimize the display to your preferences. Simply adjust the
monitor according to the preceding adjustment instructions.
The adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 11 user-defined modes can be stored in memory.
If a 12th mode is entered, it will replace the first.
Power Saving Function
This monitor is capable of 2 states of reduced power
consumption.
By sensing the absence of one or both sync signals coming
from the host computer, it will reduce power consumption as
follows.
State
Power consumption
Required
resumption time
c!) Power
indicator
POWER SAVING
indicator
1
Normal operation
100
%
—
green on
off
2
Suspend
(
1
st step of power saving)
approx.
10
%
approx. 3 sec.
green on
orange on
3
Active-off
(
2
nd step of power saving)
approx. 7%>
approx.
10
sec.
off
orange on
Power Saving Operation
The H-sync or V-sync is not present.
r
The unit goes into suspend state.
Both the H-sync and V-sync are not present.
*
The unit goes into active-off state.
The monitor requires a videocard or screen saver software
which switches off one or both sync signals to activate the
power saving function.
CAUTION; The Power Saving function will automatically put
the monitor into the Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.
Use of the Tilt-Swivel
With the tilt-swivel, this unit can be adjusted to be viewed at
your desired angle within 90° horizontally and 20° vertically.
To turn the unit vertically and horizontally, hold it at its
bottom with both hands and push in the desired direction.
The tilt-swivel can not be removed.
1 0