Sony PVM-1351Q - Manuel (Page 9)

Operating through menus
There are fi\'e buttons for menu operations on the front of
the monitor. To display the main menu, first press MENU.
The buttons you can use appear at the bottom of the menu
screen.
Functions of the buttons
Button To select menu
item
To adjust menu item
selected
MENU return to the
previous menu return to the previous
menu
ENTER decide a selected select an item
item SELECT
T move the cursor
^91 (^)upu'ards
increase selected \ alue
mo\'e the cursor
(►) downw'arcfs decrease selected value
reset current adjustment
\'alue to the factory
setting
(The abox'e items in white type correspond to the marks in
the menu.)
front of monitor
RESET buttons for
button menu
operations
[T] Main menu
Select an item and press ENTER to go to the following
menu.
[
2
] CHROMA SET UP menu
Set to ON to adjust the internal decoder for CHROMA
and PHASE (NTSC signal only) after AUTO ADJUST
(S). ' lOFF]
[
3
] COLOR TEMP/BAL menu
Select the color temperature from among 6500K, 9300K
and USER. USER is set to 6S00K in the factory setting.
You can acfjust or change the color temperature in USER
mocfe (a measuring instrument is needed). [65()0K]
0 CAPTION VISION menu
The iTionitor can display the signal with Caption Vision.
To display it, select the caption t\ pe in this menu.
[OFF]
[
5
] USER CONFIG 1 menu
Select an item tci adjust. Fo go to the USER CONFIG 2
menu, select NEXT P.ACE.
m
и
M
USER CONFIG 2 menu
Select an item to adjust. To go to the USER CONFIG 1
menu select PREVIOUS PAGE.
AUTO ADJUST screen
Select the color bar signal (full, SMPTE, ElA) and press
ENTER to start auto adjusting for CHROMA SET UP
(NTSC signal only).
ADJUST GAIN screen
Adjust GAIN in USER mode.
ADJUST BIAS screen
Adjust BIAS in USER mode.
COLOR TEMP RANGE menu
Select the color temperature range in USER mode.
[5000KH0000K]
COLOR SYSTEM DISPLAY menu
Sefect the color swstem display mode. In AUTO, the kind
of color system being used appears on the screen each
time \’ou change the signal input. [AUTO]
358 TRAP FILTER menu
Color spill or color noise may be eliminateci if you select
ON (N ГSC'.s^ signal only).
[OFF]
SUB CONTROL screen
You can finely adjust the controls on the front panel.
CONTRAST, BRIGHT, CHROMA and PHASE control
has a click at the center of its adjustment range. You can
adjust the setting of the click position with this feature.
USER PRESET menu
You can preset each control to a desirecf level and set it.
If you set USER PRESE T tci ON, the REMOTE indicator
lights up and the controls on the front panel do not
work. The monitor operates with the internal memor\’
settings. F\>r adjustment, select PRESET ADJUST. [OFF]
PRESET ADJUST screen
Adjust CONTRAST , BRIGFfT, CHROMA, PHASE.
VOLUME, APERTURE in USER PRESE I.
V HOLD screen
Adjust the x'ertical hold if the picture rolls \ ertically.
When \ ou cannot read the display, select the input that
is not connected.
COMPONENT LEVEL menu
Select the component level from among three modes.
NIO/SMPTE for 100/0/100/0 signal
BETA 7.5
for 100/7.5/75/7.5 signal
BETA 0 for 100/0/75/0 signal
[BETA 7.5[
NTSC SETUP LEVEL menu
Select the NTSC setup le\ el from two modes. I he 7.5
setup le\'cT is mainly used in north America. The 0 setup
le\ el is mainly used in Japan. [7.5[
ACC menu
Set ACC (Auto Color Control) circuit on or off. When the
fine adjustment is needed, set ,'\CC to OFF. Normalh’ set
it to ON.
[ON]
LANGUAGE menu
You can select the menu language from among the fiv e
languages (English, German, French, Italian, Spanish) on
the menu.
[ENGLISH]
([ [ indicates the lactor\' setting position.
3
in