Location and function of parts and controls, Ril ac in socket, 2j line a, line b connectors – Sony PVM-1351Q Manuel d'utilisation

Page 6: Video in (bnc), Video out (bnc), Audio out (phono jack), Line c connectors y/c in (4pin mini din), Remote connector (20pin), Rear panel

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Location and function of parts and controls

Rear panel

(Tho VV mark indicates automatic termination.)

ril AC IN socket

Connect the supplied -AC power cord to this socket and
to a wall outlet.

[2j LINE A, LINE B connectors

Two groups (A and B) ot line input connectors for the
composite \’ideo and audio signals anci their loop-

through output connectors.
To monitor the input signal fed through these

connectors, keep the LIXE/RCB selector in the I.INF

position (light off) and press the A/RGB or
B/COMPONENT selector (light on) on the front panel.

VIDEO IN (BNC)
Connect to the video output of a video equipment, such
as a VCR or a color video camera. For a loop-through
connection, connect to the \ ider) output of another
monitor.
VIDEO OUT (BNC)

Loop-through output of the \TDEO IN connector.

Connect to the video input for a V'CR or another

monitor.
When the cable is connected to this connects', the

7,h-ohms termination of the input is automaticalh

releaseci, and the signal input to the VIDFC) IN

connector is output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a

microphone via a suitable microphone amplilier. l or a
loop-through coiinection, connect t(' the audio output ol

m another nuiriitor.

AUDIO OUT (phono Jack)
Loop-through output of the AUDIO IN jack. Connect to
the audio input of a VCR or another moniU>r.

LINE C connectors
Y/C IN (4pin mini DIN)
Connect to the Y/C separate output of a \ ideo camera,
VCR or other \ icieo equipment.
Y/C OUT (4pin mini DIN)
Loop-through output of the Y/C IN connector. Connect
to the Y/C separate input of a VCR or another monitor.
When the cable is connected to this connector, the
75-ohms termination ot the input is automaticallv
released, and the signal input h' the Y/C IN connector is
output from this connector.
AUDIO IN (phono Jack)

Connect to the audio output of a VN'R or a microphone

(through a suitable microphone amplifier).
AUDIO OUT (phono Jack)

Loop-through output of the AULhlO IN connector.

Connect to the audio input of a VCR or another monitor.

REMOTE connector (20pin)

Connect to the tally output of a control console, special-
effect generator, etc. The tallv lamp on the front panel

will be turned on and oft b\' the connected equipment.

This connector can be used for connecting a remote
controller. FAir the pin assignment ol this connector, see

"Specifications" on page Id.

Advertising
Ce manuel est liée aux produits suivants: