Ij tally lamp, 2] power switch and indicator, 3] remote indicator – Sony PVM-1351Q Manuel d'utilisation
Page 4: 41 volume control, 5] contrast control, 6] phase control, Ih chroma control, 8] bright (brightness) control, 9] aperture control, Ill menu (exit) button
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
[ij Tally lamp
Lights up when the \ ideo camera connected to this
monitor is selected, indicating that the picture is being
recorded.
[2] POWER switch and indicator
Depress to turn the monitor on. t he indicator will light
up in green.
[3] REMOTE indicator
Lights up when vou set L’SHR PRESHT to ON in the
menu, or when vou cr'nnect a supplied cable to
REMOTE connector (No. 17 pin is ground), t he controls
on the front panel cio not work when this indicator lights
up.
[41 VOLUME control
Lurn this control clockwise or counterck'ckwise to
obtain the desired x'olume.
[
5
]
CONTRAST control
Turn clockwise to make the contrast higher and
counterclockwise to make it k'wer.
[
6
]
PHASE control
This control is effectix e only for the N I SC ^ - and
N’kSCi r. color systems. Lurn ck'ckwise to make the skin
tones greenish and counterck'ckwise to make them
purplish.
iH CHROMA control
Turn clockwise to make the color intensity higher and
counterclockwise to make it lower.
[8] BRIGHT (brightness) control
Turn clockwise for more brightness and
counterclockwise for less.
[
9
]
APERTURE control
Turn clockwise for more sharpness and
counterclockwise for less.
The APERTURE, CHROMA, PHASE control settings have
no effect on the pictures of RGB signals.
Ill
MENU (EXIT) button
Press f(' make the menu appear. Press to return to the
previous screen in the menu.
M
ENTER (SELECT) button
Press to decide a selected item in the menu.
01 t (+)/ ♦ (-) buttons
Press tc' mo\ e the cursor (►) or adjust selected \ alue in
the menu.