Grease on the o-ring, Do not twist the o-ring. (ill. h]-4), Do not trap the o-ring between the casings – Sony HVL-ML20 Manuel d'utilisation

Page 4: Storage, Useful life of the o-ring, When buying grease or the o- ring, Do not twist the o-ring, H]-4)

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Grease on the O-ring.

CriMso protects the O-ring from wear. After checking

that there are no cracks or cinst on the O-ring, grease
it using a finger. During greasing, recheck that there
are no cracks or dust. Ne\ er use cloth or paper for
greasing because the fibers may cling.

Do not twist the O-ring.

(ill.

H]-4)

Set the O-ring into the groo\’e evenly. Never twist it.

Do not trap the O-ring between

the casings.

When closing the casing, be careful not to trap the O-

ring between the front and rear casings. If this

happens, not only will the O-ring be damaged, but
also water may leak in.

Storage

Store the supplied spare O-ring in a cool place,
packed in the original carton. & sure to avoid the
following.

• Exposure to direct sunlight
• Placing a heavy object on the O-ring
• Folding the O-ring

Useful life of the O-ring

It depends upon the maintenance and the length of
use, but we recommend changing the O-ring every

one or two years.

When buying grease or the O-
ring

To replace grease (2-115-921-01) or the O-ring (3-945-
133-01-), contact your nearest Sony Service Center or
Sony Shop.

Sony does not accept liability for damage to the
underwater video light and for the cost of
recording if water leakage caused by incorrect
operation occurs.

Advertising