Replacing the bulb – Sony HVL-ML20 Manuel d'utilisation
Page 12
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Replacing the bulb
See illustration Q
For replacement, always use the XB-ML20 Sony
halogen lamp (not supplied).
1 Open the casing and remove the battery
pack.
2 Pull out the bulb socket gently.
Turn the socket lever (S) counterclockwise to the
release positon © and pull out the bulb socket ©
gently from the front casing.
3 Remove the old bulb from the socket.
The bulb is hot when it has just burned out. Wait
until the bulb cools down before removing it.
4 Plug in the new bulb (not supplied) gently.
® New bulb
® Plastic bag
To prevent the bulb from being smudged with
finger prints, plug in the bulb holding it with a
plastic bag or a dry cloth. If the bulb is smudged,
the light may smoke when it is turned on or the
bulb life may be shortened. If you have touched
the bulb surface, clean it completely.
Do not plug the bulb into the socket forcibly.
5 Replace the bulb socket to the front casing.
Replace the bulb socket to the front casing, then
turn the socket lever clockwise to the lock
position ©.