ERICO Connections used on Rail Properties - Not to Rail Manuel d'utilisation

Cadweld, Connections used on rail properties - not to rail

Advertising
background image

CADWELD

®

Connections used on Rail Properties - Not to Rail

Refer to the mold tag for applicable instruction sheets.

IPRNS_B

www.erico.com

Copyright ©2012, 2014 ERICO International Corporation. All rights reserved.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

IPRNS_B R424IS14WWENFR MFG0414

I. HOW TO READ THESE INSTRUCTIONS /

WHAT THE SYMBOLS MEAN

The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols,
and the explanations with them, deserve your careful
attention and understanding. The safety warnings do
not by themselves eliminate any danger. The instructions
and warnings are not substitutes for proper accident
prevention measures.

SAFETY ALERT SYMBOL: Indicates warning or caution.

It may be used in conjunction with other symbols or pictographs.

WARNING:

Failure to obey a safety warning may result in

property damage, serious personal injury or death, and the
serious personal injury or death of others. Always follow the
safety precautions to reduce these risks.

CAUTION:

Failure to obey a safety caution may result in

property damage, personal injury, and injury to others. Always
follow the safety precautions to reduce the risk of fi re, other
property damage and personal injury.

NOTE: Advises you of information or instructions vital to the
operation or maintenance of the equipment.

In the following instructions, cautions and warnings, there is
a consequence for failure to heed:

IMMEDIATE, that may result in personal injury or a failed

operation that may result in a less than optimum bond and that

will not give the physical and electrical performance expected.

II. GENERAL RULES FOR SAFETY IN THE APPLICATION

OF EXOTHERMIC CONNECTIONS

WARNING:

Do not attempt to make an exothermic

connection until you have thoroughly read and understand
the instructions that accompany all of the various
components of the system and have been properly trained
in the use of this product. Use only the system components
designed to be used together from a single manufacturer.

Failure to comply may result in unsatisfactory bonding as well as
accidents involving fi re, personal injury, and rail damage that may
lead to property damage, injury or death.

FIGURE

1

Safety Helmet

Jacket or Shirt

and Trousers

Safety Shoes

Safety Goggles

Cuffed Leather

Gloves

CAUTION:

The worker(s) must be certain that they

can achieve good footing in the area where

the weld will be done. They should be able to step

away from the weld reaction, to be upwind of it.

Failure to observe this may result in personal injury.

WARNING:

Only the correct grinding equipment,

welding equipment and welding material designed for
the specifi c application must be used.
All items used must
be designed and supplied by the same manufacturer. All items
must be in good condition and not worn, altered or damaged.
Failure to do so may result in an unsafe application with the
risk of personal injury and/or a less than optimum connection.

WARNING:

The area where the connection is to be

applied must be sheltered suffi ciently if the

weather is inclement. This is to keep the surface,

all equipment, and materials dry until the weld is

completed. Failure to do so may result in an unsafe application with
the risk of personal injury and a less than optimum connection.

CAUTION:

The work area must be well ventilated

Workers should avoid breathing the smoke of the

exothermic reaction by positioning themselves upwind

of the mold before igniting the welding material.

After ignition, it is advisable to step back from the mold.
Failure to observe this instruction may result in lung irritation.

WARNING:

The worker(s) performing the welding

must be properly dressed and equipped.

Examples include cotton or woolen garments

(most synthetic fabrics melt rather than char when

exposed to fl ame, causing severe burns), safety footwear with
non-slip soles, head protection, leather gloves, eye goggles and
other clothing and equipment recommended or required by
the person’s employer, industry practice, or applicable laws and
regulations. The worker(s) must not be under the infl uence of
any alcohol, drugs or other chemicals that would impair their
judgment or performance of the job. Failure to observe this
may result in serious personal injury. See Figure 1.

IPRNS_B

Advertising