Using your dryer, Press power, Select the desired cycle – Whirlpool WED8900BW Manuel d'utilisation
Page 8: Clean the lint screen, Load the dryer
8
3.
Press POWER
Press the POWER button to turn on the dryer.
4.
Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide”
for more information about each cycle.
NOTE: Not all cycles are available on all models.
Using Your Dryer
1.
Clean the lint screen
Clean the lint screen before each load. Pull the lint screen
straight up. Roll lint off the screen with your fingers. Do not rinse
or wash screen to remove lint. Wet lint is hard to remove. Push
the lint screen firmly back into place.
For additional cleaning information, see “Dryer Care”.
2.
Load the dryer
Open the door by pulling on the handle. Place laundry in the
dryer. Add a dryer sheet to wet load, if desired. Close the door.
IMPORTANT: Do not overload the dryer. Items need to tumble
freely. Overloading can lead to poor drying performance and
may increase wrinkling and tangling.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.