Oven light, Oven door – Whirlpool WGG555S0BS Manuel d'utilisation

Page 18

Advertising
background image

18

OVEN DOOR EXTERIOR

Cleaning Method:

Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.

affresh

®

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):
See “Assistance or Service” section to order.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.

Cleaning Method:

Self-Cleaning cycle:
See “Self-Cleaning Cycle” first.

OVEN RACKS

Cleaning Method:

Self-Cleaning cycle:
See “Self-Cleaning Cycle” first. Remove racks, or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.

Steel-wool pad.

Oven Light

The ovens light is a standard 40-watt appliance bulb.

Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

Oven Door

IMPORTANT:

Use two hands to remove oven door(s).

Prior to removing the oven door, prepare a surface where you
will place it. This surface should be flat and covered with a
soft blanket.

To avoid oven door glass breakage:

Do not close the oven door if the racks are not fully inserted
into the oven cavity or when bakeware extends past the front
edge of an oven rack.

Do not set objects on the glass surface of the oven door.

Do not hit glass surfaces with bakeware or other objects.

Do not wipe down glass surfaces until the oven has
completely cooled.

For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.

To Remove:

1. Open oven door all the way.

2. Locate the oven door hinge locks in both corners of the oven

door. Rotate the hinge locks forward and down to the
unlocked position.

3. Partially close the oven door to engage the door latch locks.

The door will stop at this point.

4. Using two hands, lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from
the oven door frame.

5. Set the oven door(s) aside on the prepared covered work

surface, with the oven door resting on its handle.

To Replace:

1. Using two hands, grasp the door as shown in the following

illustration. Locate the slots on each side of the oven cavity,
and insert the oven door hinges into the slots.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Lower the oven door to the fully open position.

4. Move the oven door hinge locks back to the locked position.

Check that the door is free to open and close. If it is not,
repeat the previous steps.

Advertising
Ce manuel est liée aux produits suivants: