Problem solver, Warning – Whirlpool WEG730H0DS Manuel d'utilisation

Page 17

Advertising
background image

17

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,
refer to the warranty page in this manual and scan the code there with your mobile device, or visit
http://www.whirlpool.com/product_help. In Canada, visit http://www.whirlpool.ca.

Contact us by mail with any questions or concerns at the address below:

In the U.S.A.:

Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

PROBLEM SOLVER

PROBLEM

POSSIBLE CAUSES AND/OR SOLUTIONS

Nothing will operate

Power supply cord is unplugged - Plug into a grounded 3 prong outlet.

ENERGY SAVE is active, and the display is blank - Press any key on the control to display the Time of
Day. See the “Electronic Oven Controls” section for more information.

Household fuse is blown or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.

Main or regulator gas shutoff valve is in the off position - See the Installation Instructions.

The range is improperly connected to the gas supply - Contact a trained repair specialist or see
Installation Instructions.

Surface burners will not
operate

The control knob is not set correctly - Push in knob before turning to a setting.

Air in the gas lines - If this is the first time the surface burners have been used, turn on any one of the
surface burner knobs to release air from the gas lines.

Clogged burner ports - See “Sealed Surface Burners” section.

Surface burner flames are
uneven, yellow and/or
noisy

Clogged burner ports - See “Sealed Surface Burners” section.

Burner caps positioned improperly - See “Sealed Surface Burners” section.

Range converted improperly - If propane gas is being used, contact a service technician or see cover
for contact information.

Excessive heat around
cookware on cooktop

Cookware and flame are not matched - The cookware should be centered above the burner with the
bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of
the pan.

Cooktop cooking results
not what expected

Improper cookware - Ideal cookware should have a flat bottom, straight sides and a well fitting lid, and
the material should be of a medium to heavy thickness.

Control knob set to incorrect heat level - See “Cooktop Use” section.

Range is not level - Level the range. See the Installation Instructions.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

Advertising
Ce manuel est liée aux produits suivants: