Sony DPP-MS300E - Manuel (Page 15)

Basic Operations
Basic Operations
15 GB
4
Click “Next,” then click the frame you want to print
over the image.
The selected frame overlaps the selected image, and
the overlapped image appears in the operation
window.
Select the
desired frame.
Adjust the size
or direction for
the image and
frame.
Combined
image of the
selected image
and frame
5
Click “Next” and the “Print” dialog box appears.
To change the printer settings, click “Print Setup”
in the “Print” dialog box.
The “Print Setup” dialog box appears.
Adjusting the size or
direction for the image
and frame
Click “Frame” or “Image”
to designate the object
you want to adjust, then
adjust the size or
direction.
For details, see the Sony
Printer Utility for MS300/
MS300E Help.
6
Set “Size” of the “Paper” by referring to the
combination below.
Print paper Print “Size” setting
loaded cartridge loaded
Standard paper Standard type A6 Standard/Sticker
2/16-cut sticker Standard type A6 Standard/Sticker
Super Coat Super Coat type A6 Super Coat
Notes
• Use the set of print
paper and print
cartridge supplied
together in the same
carton. If you use the
paper and cartridge in
a different
combination, proper
printing results may
not be obtained or
other trouble may
occur. Also make sure
to set “Size” as shown
in the table. If you
make a different
setting, you cannot
print.
• For the details on print
paper and print
cartridge, refer to
“Using print packs (not
supplied)” on page 14
of the operating
instructions of the
printer.
continued
Select “Sony
DPP-MS300”
as the printer.
Select the
paper.
Orientation is
automatically
selected.