Sony TA-E1 - Manuel (Page 14)

14 GB
Troubleshooting
If you experience any of the following difficulties while
using the preamplifier, use this troubleshooting guide to
help you remedy the problem. Should any problem
persist, consult your nearest Sony dealer.
There’s no sound or only a very low-level sound
is heard.
/ Check that all components are connected securely.
/ Make sure that you’ve selected the correct
component on the preamplifier.
The left and right sounds are unbalanced or
reversed.
/ Check that all components are connected correctly
and securely.
Severe hum or noise is heard.
/ Check that all components are connected securely.
/ Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 feet)
away from a TV set or fluorescent light.
/ Move your TV away from the audio components.
/ The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
Recording cannot be done.
/ Check that the components are connected correctly.
/ Select the source component by rotating the
INPUT SELECTOR control.
Additional
Information