Self-diagnosis display – Sony DCR-DVD100E Manuel d'utilisation

Page 123

Advertising
background image

Troubleshooting

123

-GB

C:21:00

Self-diagnosis display

5-digit display

Cause and/or Corrective Actions

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

c Use an “InfoLITHIUM” battery pack. (page 127)

• The disc is faulty.

c Use a compatible disc with your camcorder. (page 6)

• Moisture condensation has occurred.

c Turn off your camcorder and leave your camcorder for

at least an hour to acclimatise it. (page 130)

• A malfunction that you can service yourself other than

those above has occurred.

c Remove the disc and insert it again, then operate your

camcorder again.

c Disconnect the mains lead of the AC adaptor or remove

the battery pack. After reconnecting/reinstalling the
power supply, operate your camcorder.

• A malfunction that you cannot service has occurred.

c Contact your Sony dealer or local authorised Sony

service facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem a even if you try the suggested corrective actions a few
times, contact your Sony dealer or local authorised Sony service facility.

Your camcorder has a self-diagnosis display
function.
This function displays the current state of your
camcorder as a 5-digit code (a combination of a
letter and figures), on the LCD display or in the
viewfinder. If a 5-digit code is displayed, check the
following list of codes. The last 2 digits (indicated
by ss) differ depending on the state of your
camcorder.

LCD display or viewfinder

Self-diagnosis display

• C:ss:ss

You can service your camcorder
yourself.

• E:ss:ss

Contact your Sony dealer or local
authorised Sony service facility.

C:04:ss

C:13:ss

C:21:ss

C:31:ss
C:32:ss

E:20:ss
E:61:ss
E:62:ss
E:93:ss
E:94:ss

Advertising