Dubbing to a tape – Sony DCR-DVD100E Manuel d'utilisation

Page 106

Advertising
background image

106

-GB

Dubbing to a tape

Before operation

•Set [DISPLAY] in

(OTHERS) to LCD in

the SETUP display. (The default setting is
[LCD].)

•Press the following buttons to make the

indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY/BATT INFO
– DISPLAY on the Remote Commander
– DATA CODE on the Remote Commander

1

Insert the recorded disc into your
camcorder.

2

Prepare the VCR for recording.
Insert a blank tape (or a tape you want
to record over) into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
VCR.

3

Play back the recorded disc on your
camcorder.

4

Start recording on the VCR.
Refer the operating instructions of your
VCR.

When you have finished dubbing

Stop recording on the VCR, then press x on
your camcorder.

Dubbing a disc to a tape

Advertising