Sony ICF-CL70 - Manuel (Page 27)

A
d
ditio
n
al inf
o
rm
ati
o
n
27 GB
*3)
When using a “Memory Stick Micro” media with
the clock radio, always insert it into an M2 adaptor.
*4) “M2” is an abbreviation for “Memory Stick Micro”
media. In this section, “M2” is used to describe
“Memory Stick Micro” media.
*5) Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
protection technology developed by Sony using
authentication and encryption.
• The clock radio does not support 8 bit parallel data
transfer.
Notes on use
• For the latest information on the “Memory
Stick” media types that the clock radio
supports, see the “Memory Stick” media
compatibility information on the Sony web
site:
http://www.memorystick.com/en/support/
compatible.html
• Do not insert more than one “Memory Stick”
media at the same time, which may cause
trouble with the clock radio.
• If you use a “Memory Stick Micro” media with
the clock radio, “Memory Stick Micro” media
needs to be inserted into an “M2” adaptor.
• If you insert a “Memory Stick Micro” media
into the clock radio without an “M2” adaptor,
you may be unable to remove the “Memory
Stick Micro” media.
• If you insert a “Memory Stick Micro” media
into an “M2” adaptor, and insert the “M2”
adaptor into a “Memory Stick Duo” media
adaptor, the clock radio may not operate
properly.
• When you format a “Memory Stick” media,
use the format function of your clock radio. If
you format a “Memory Stick” media with your
computer, images may not be displayed
properly.
• When you format a “Memory Stick” media, all
the data including protected image files will be
erased. To avoid erasing important data by
accident, make sure to check the contents of
the “Memory Stick” media before formatting.
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure to
attach it to the labelling position. Be careful
that the label does not stick out.
Write-protect switch
Place the label here.
Write
enable
position Write
protect
position