Sony DR-BT100CX Manuel d'utilisation

Page 18

Advertising
background image

DR-BT100CX_4-130-037-63(1)

18

US

To make a connection with

the last connected Bluetooth
device by operating this unit

1

Press the multi function button.

The indicator (blue) starts flashing,

and the unit performs the

connection operation for about 5

seconds.

Note

When listening to music with this unit, a

Bluetooth connection cannot be made with

the multi function button.

To call

1

Use the buttons on your mobile

phone when making a call.
If no dial tone is heard on this unit,

press and hold the multi function

button for about 2 seconds.

Tip

You can call in the following way, depending

on the Bluetooth mobile phone. Refer to the

manual supplied with your mobile phone on

operating details.

– When not communicating, you can call

using the voice-dial function by pressing

the multi function button.

– You can call the last dialed number by

pressing the multi function button for

about 2 seconds.

To receive a call

When an incoming call arrives, a ring

tone will be heard from the unit.

1

Press the multi function button

on the unit.
The ring tone differs in the

following ways, depending on your

mobile phone.

– ring tone set on the unit

– ring tone set on the mobile

phone

– ring tone set on the mobile

phone only for Bluetooth

connection

Note

If you received a call by pressing the

button on the Bluetooth mobile phone,

some Bluetooth mobile phones may have

handset use priority. In this case, set to

talk with the unit by pressing and

holding the multi function button for

about 2 seconds, or by operating the

Bluetooth mobile phone. For details,

refer to the manual supplied with your

Bluetooth mobile phone.

To adjust the volume

Push the jog switch up or down to

adjust the volume.

Tips

You cannot adjust the volume when not

communicating.

Volume for calling and listening to music

can be adjusted independently. Even if you

change the volume while playing back the

music, the volume of a call does not

change.

To terminate a call

You can end a call by pressing the

multi function button on the unit.

To stop use

1

Terminate Bluetooth

connection by the Bluetooth
mobile phone.



Press and hold the POWER

button for about  seconds to
turn off the power.
The indicator (blue) lights up, and

the unit turns off.

Advertising