Sony DCR-TRV22E - Manuel (Page 248)

248
Icon/item
TAPE SET
REC MODE
AUDIO MODE
q REMAIN
FRAME REC
INT. REC
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
z OFF
ON
ON
z OFF
SET
Meaning
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record in the 12-bit mode (2 stereo sounds)
To record in the 16-bit mode (1 stereo sound with
high quality)
To display the remaining tape:
• For about 8 seconds after setting the POWER
switch to PLAYER 1) /VCR 2) or CAMERA and
inserting a cassette, then your camcorder
calculates the remaining amount of tape
• For about 8 seconds after DSPL/BATT INFO is
pressed twice
• For about 8 seconds after setting the POWER
switch to PLAYER 1) /VCR 2) and is pressed
To always display the remaining tape indicator
To deactivate frame recording
To activate frame recording (p. 89)
To activate Interval Recording (p. 87)
To deactivate Interval Recording
To set INTERVAL and REC TIME for Interval
Recording
POWER
switch
1) /
2)
3)
1) /
2)
1) DCR-TRV12E/TRV14E
2) DCR-TRV19E/TRV22E/TRV33E
3) DCR-TRV22E/TRV33E
Notes on the LP mode
•When you record the tape in the LP mode on
your camcorder, we recommend playing
back the tape on your camcorder. When you
play back the tape on other camcorders or
VCRs, noise may occur in pictures or sound.
•When you record in the LP mode, we
recommend using a Sony Excellence/Master
mini DV cassette so that you can get the most
out of your camcorder.
•You cannot make audio dubbing on the tape
recorded in the LP mode. Use the SP mode
for the tape to be audio dubbed.
•When you record in the SP and LP modes on
one tape or you record some scenes in the LP
mode, the playback picture may be distorted
or the time code may not be written properly
between scenes.
Notes on AUDIO MODE
•You cannot dub audio sound on the tape
recorded in the 16-bit mode.
•When playing back the tape recorded in the
16-bit mode, you cannot adjust the balance in
AUDIO MIX.
Changing the menu settings