Sony SA-FT7ED Manuel d'utilisation

Sa-ft7ed

Advertising
background image

SA-FT7ED (GB/FR) 2-634-474-11(1)

© 2005 Sony Corporation

Printed in China

Home Theatre Speaker System

SA-FT7ED

2-634-474-

11(1)

Owner’s Record

The model and serial numbers are located on the rear of the
unit. Record the serial number in the space provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.

Model No. SA-FT7ED

Serial No.

WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To prevent fire, do not cover the ventilation of the apparatus
with news papers, table-cloths, curtains, etc. And don’t place
lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with
liquids, such as vases, on the apparatus.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.

NOTICE FOR THE CUSTOMERS IN THE U.S.A

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert the user
to the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

CAUTION

Use of this applicance with some systems may present a
shock or fire hazard. Do not use with any units which have the
following marking located near output.
WARNING: HAZARDOUS ENERGY!

WARNING

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna (aerial).
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for

help.

CAUTION

You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.

NOTICE FOR THE CUSTOMERS IN CANADA

This Class B digital apparatus complies with Canadian ICES-003.

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.

ENERGY STAR

®

is a U.S. registered mark.

As an ENERGY STAR

®

partner, Sony

Corporation has determined that this product
meets the ENERGY STAR

®

guidelines for energy

efficiency.

About this manual

The SA-FT7ED is a 5.1 channel speaker system consisting
of two front speakers, two surround speakers (there is no
difference between front and surround speakers), one center
speaker, and one subwoofer. It supports Sony Digital Cinema
Sound, Dolby* Pro Logic, and Dolby Digital, etc., and is thus
geared towards the enjoyment of movies.

* “Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

Precautions

On safety

• Before operating the system, be sure that the operating voltage

of the system is identical with that of your local power supply.

• The unit is not disconnected from the AC power source

(mains) as long as it is connected to the wall outlet, even if the
unit itself has been turned off.

• Unplug the system from the wall outlet if it is not to be used

for an extended period of time. To disconnect the cord, pull
the cord by grasping the plug. Never pull the cord itself.

• Should any liquid or solid object fall into the system, unplug

the system’s power cord and have the system checked by
qualified personnel before operating it any further.

• AC power cord must be changed only at the qualified service

shop.

Assembly

Attaching the table top stand

(for front/surround speakers)

1

Secure the terminal adapters (

) to the table top

stand bases (

) with the screws (M5) () (-1).

2

Attach the front or surround speakers to the

terminal adapters (

), and secure them with the

hex-head screws (

) (-2).

Attaching the wall mounting bracket

(for front/surround/center speaker)

1

Attach the terminal adapters (

) to the front

and surround speakers before attaching the wall
mounting bracket.
Secure the wall mounting hooks (

) to the back

of each speaker with the screws (M4) (

) and

connect the speaker cords (

 or ) (-1).

2

Attach the wall mounting brackets (

 or ) on a

wall with screws (not supplied) (

-2).

3

Secure the screws on the wall mounting brackets

(

) after adjusting the angles (front and surround

speakers only) (

-3).

4

Set the wall mounting hooks (

) on the back of

the speakers onto the wall mounting brackets (

or

) (-4).

Notes

• Use screws that are suitable for the wall material and strength.

As a plaster board wall is especially fragile, attach the screws
securely to a beam and fasten them to the wall. Install the
speakers on a vertical and flat wall where reinforcement is
applied.

• Contact a screw shop or installer regarding the wall material

or screws to be used.

• Sony is not responsible for accidents or damage caused by

improper installation, insufficient wall strength, improper
screw installation, or natural calamity, etc.

Attaching the center speaker stand

(for center speaker)

1

Thread the speaker cord (

) through the holes on

the base (

) and the adjuster () of the center

speaker stand, and connect it to the center speaker
(

-1).

2

Secure the adjuster (

) to the center speaker with

the screws (M4) (

) (-2).

3

Secure the base (

) to the adjuster () with the

screws (M5) (

) after adjusting the angle (-3).

Placing the stickers

When using the speakers with their stands, you can cover the
screw holes for wall mounting on the back of the speakers with
the supplied stickers.
When installing the front/surround speakers on the wall, you
can cover the screw holes on the bottom of the terminal adapters
with the supplied stickers.

On operation

• Do not drive the speaker system with a continuous wattage

exceeding the maximum input power of the system.

• If the polarity of the speaker connections are not correct,

the bass tones will be weak and the position of the various
instruments obscure.

• Contact between bare speaker wires at the speaker terminals

may result in a short circuit.

• Before connecting, turn off the amplifier to avoid damaging

the speaker system.

• The speaker grille cannot be removed. Do not attempt to

remove the grille on the speaker system. If you try to remove
it, you may damage the speaker.

• The volume level should not be turned up to the point of

distortion.

If you encounter color irregularity on a
nearby TV screen

This speaker system is magnetically shielded to allow it to be
installed near a TV set. However, color irregularities may still
be observed on certain types of TV sets.

If color irregularity is observed...

 Turn off the TV set, then turn it on again in 15 to 30 minutes.

If color irregularity is observed again...

 Place the speakers farther away from the TV set.

If howling occurs

Reposition the speakers or turn down the volume on the
amplifier.

On placement

• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:

— Extremely hot or cold
— Dusty o to vibrations
— Subject to direct sunlight

• Use caution when placing the speaker on a specially treated

(waxed, oiled, polished, etc.) floor, as staining or discoloration
may result.

On cleaning

Clean the speaker cabinets with the supplied cleaning cloth.

If you have any questions or problems concerning your speaker
system, please consult your nearest Sony dealer.

Supplied accessories and

installation methods

The speakers of this system can be installed in 2 ways: using
table top stands, or wall mounting brackets. The accessories
needed for each installation method are shown in the tables
below.

Front/Surround speaker (There is no difference
between front and surround speakers.)

Supplied accessories

Installation methods

Table top

stand

Wall mounting

bracket

For Front speakers
 Speaker cord

(3.5 m) × 2

For Surround speakers
 Speaker cord

(10 m) × 2

For Front/Surround speakers

 Hex-head screw

× 8

 Wrench × 1

 Terminal adapter

× 4

 Table top stand

base × 4

-

 Screw (M5) × 16

-

 Wall mounting

bracket × 4

-

 Screw (M4) × 16

-

 Wall mounting

hook × 8

-

Center speaker

Supplied accessories

Installation methods

Table top

stand

Wall mounting

bracket

 Speaker cord

(3.5 m) × 1

 Center speaker

stand base × 1

-

 Center speaker

stand adjuster × 1

-

 Screw (M5) × 2

-

 Screw (M4) × 4

 Wall mounting

hook × 2

-

 Wall mounting

bracket × 1

-

English

Français

AVERTISSEMENT

Pour éviter tout risque d’incendie ou d’électrocution,
ne pas exposer cet appareil à la pluie ou à l’humidité.
Pour prévenir tout risque d’incendie, ne couvrez pas les orifices
d’aération de l’appareil avec des journaux, nappes, rideaux, etc.
Et ne placez pas de bougies allumées sur l’appareil.
Pour prévenir tout risque d’incendie ou d’électrocution, ne
posez aucun objet rempli de liquide, comme un vase, sur
l’appareil.
Pour prévenir tout risque d’électrocution, n’ouvrez jamais le
coffret. Adressez-vous à un personnel qualifié uniquement pour
toute intervention sur l’appareil.

N’installez pas l’appareil dans un espace confiné comme
dans une bibliothèque ou un meuble encastré.

NOTICE POUR LES CLIENTS AU CANADA

Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

ATTENTION

POUR EVTER LES CHOCS ELECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.

ENERGY STAR

®

est une marque déposée aux

Etats-Unis.
En sa qualité de partenaire ENERGY STAR

®

,

Sony Corporation a déterminé que ce produit
répond aux prescriptions ENERGY STAR

®

en

matière d’utilisation efficace de l’énergie.

A propos de ce manuel

Le SA-FT7ED est un système d’enceintes 5.1 canaux constitué
de deux enceintes avant, de deux enceintes surround (il n’existe
aucune différence entre les enceintes avant et les enceintes
surround), d’une enceinte centrale et d’un caisson de graves. Il
prend en charge Sony Digital Cinema Sound, Dolby* Pro Logic,
Dolby Digital, etc. et est donc destiné plus particulièrement à
visionner des films.

* Le terme « Dolby » et le sigle double D sont des marques

commerciales de Dolby Laboratories.

Précautions

Sécurité

• Avant de mettre le système en service, assurez-vous que

sa tension de fonctionnement est identique à celle de
l’alimentation secteur locale.

• Le système n’est pas isolé de la source d’alimentation secteur

tant qu’il reste branché sur la prise murale, même s’il a été
éteint.

• Débranchez le système s’il ne doit pas être utilisé pendant

longtemps. Pour débrancher le cordon, tirez sur la fiche. Ne
tirez jamais sur le cordon proprement dit.

• Si un liquide ou un solide pénètre dans le système, débranchez

le cordon d’alimentation du système et faites vérifier le
système par un professionnel avant de l’utiliser à nouveau.

• Le cordon d’alimentation secteur doit être remplacé seulement

dans un centre de service compétent.

Fonctionnement

• Ne pas faire fonctionner le système acoustique

continuellement à une puissance dépassant sa puissance
d’entrée maximale.

• Si la polarité des connexions d’enceintes n’est pas correcte,

les graves seront faibles et la position des différents
instruments de musique indistincte.

• Le contact des fils d’enceinte dénudés au niveau des bornes de

l’enceinte peut provoquer un court-circuit.

• Avant de raccorder les enceintes, éteignez l’amplificateur pour

éviter d’endommager le système acoustique.

• Les grilles des enceintes ne peuvent pas être retirées.

N’essayez pas de les enlever car les enceintes pourraient être
endommagées.

• Le volume sonore ne doit pas être élevé au point que le son en

soit déformé.

Si les couleurs sont anormales sur un écran
de téléviseur situé à proximité

Le système acoustique est isolé contre le magnétisme et peut
être installé près d’un téléviseur. Cependant, avec certains
téléviseurs, vous pourrez observer des anomalies de couleur.

Si les couleurs sont anormales…

c Mettez le téléviseur hors tension, puis remettez-le sous

tension 15 à 30 minutes plus tard.

Si les couleurs restent anormales…

c Eloignez les enceintes du téléviseur.

Si un sifflement se produit

Repositionnez les enceintes ou réduisez le volume sur
l’amplificateur.

Emplacement

• N’installez pas les enceintes en position inclinée.
• N’installez pas les enceintes dans des endroits :

— Extrêmement chauds ou froids
— Poussiéreux ou sales
— Très humides
— Sujets à des vibrations
— Exposés à la lumière directe du soleil

• Prenez les précautions nécessaires lors de l’installation des

enceintes sur un plancher traité (ciré, huilé, verni, etc.) pour
éviter l’apparition de taches ou la décoloration du sol.

Entretien

Nettoyez les boîtiers des enceintes avant la lingette de nettoyage
fournie.

Pour toute question ou difficulté concernant votre système
acoustique, veuillez consulter votre revendeur Sony.

Montage

Fixation du support de table

(pour les enceintes avant/surround)

1

Fixez les bornes de raccordement (

) aux bases

des supports de table (

) à l’aide des vis (M5)

(

) (-1).

2

Raccordez les enceintes avant ou surround aux

bornes de raccordement (

) et fixez-les à l’aide

des vis à six pans (

) (-2).

Fixation du support de fixation

mural

(pour les enceintes avant/surround/centrale)

1

Branchez les bornes de raccordement (

) aux

enceintes avant et surround avant de fixer le
support de fixation mural.
Fixez les crochets de fixation muraux (

) à

l’arrière de chaque enceinte à l’aide des vis (M4)
(

) et raccordez les cordons des enceintes ( ou

) (-1).

2

Fixez les supports de fixation muraux (

 ou )

au mur à l’aide de vis (non fournies) (

-2).

3

Fixez les vis aux supports de fixation muraux (

)

après avoir réglé les angles (enceintes avant et
surround uniquement) (

-3).

4

Accrochez les crochets de fixation muraux (

),

situés à l’arrière des enceintes, aux supports de
fixation muraux (

 ou ) (-4).

Remarques

• Utilisez des vis adaptées au matériau et à la résistance du mur.

Comme les plaques de plâtre sont particulièrement fragiles,
fixez fermement les vis à une poutre et fixez-les au mur.
Installez les enceintes sur une paroi verticale et plane à un
endroit où se trouve un renforcement.

• Adressez-vous à un magasin de bricolage ou à un installateur

pour connaître le matériau du mur ou les vis à utiliser.

• Sony ne peut être tenu responsable de tout accident ou

dégât entraîné par une installation incorrecte, une résistance
insuffisante du mur, une mauvaise fixation des vis, une
catastrophe naturelle, etc.

Fixation du support de l’enceinte

centrale

(pour l’enceinte centrale)

1

Faites passer le cordon d’enceinte (

) à travers

les orifices de la base (

) et de l’adaptateur ()

du support de l’enceinte centrale et raccordez-le à
celle-ci (

-1).

2

Fixez l’adaptateur (

) à l’enceinte centrale à

l’aide des vis (M4) (

) (-2).

3

Fixez la base (

) à l’adaptateur () à l’aide des

vis (M5) (

) après avoir réglé l’angle (-3).

Placement des autocollants

Lorsque vous utilisez les enceintes avec leurs supports, vous
pouvez employer les autocollants fournis pour obturer les
orifices des vis de fixation murale, à l’arrière des enceintes.
Lorsque vous fixez les enceintes avant/surround au mur, vous
pouvez utiliser les autocollants fournis pour obturer les orifices
des vis situés sur le dessous des bornes de raccordement.

Accessoires fournis et

méthodes d’installation

Les enceintes de ce système peuvent être installées de 2
manières : à l’aide de supports de table ou de supports de
fixation muraux. Les accessoires nécessaires pour chacune
de ces méthodes d’installation sont illustrés dans les tableaux
ci-dessous.

Enceinte avant/surround (Il n’existe aucune différence
entre les enceintes avant et surround.)

Accessoires fournis

Méthodes d’installation

Support de

table

Support de

fixation mural

Pour les enceintes avant
 Cordon d’enceinte

(3,5 m) × 2

Pour les enceintes surround
 Cordon d’enceinte

(10 m) × 2

Pour les enceintes avant/surround

 Vis à six pans

× 8

 Clй Ч 1

 Borne de

raccordement
× 4

 Base du support de

table × 4

-

 Vis (M5) × 16

-

 Support de fixation

mural × 4

-

 Vis (M4) × 16

-

 Crochet de fixation

mural × 8

-

Enceinte centrale

Accessoires fournis

Méthodes d’installation

Support de

table

Support de

fixation mural

 Cordon d’enceinte

(3,5 m) × 1

 Base du support de

l’enceinte centrale
× 1

-

 Adaptateur de la

base de l’enceinte
centrale × 1

-

 Vis (M5) × 2

-

 Vis (M4) × 4

 Crochet de fixation

mural × 2

-

 Support de fixation

mural Ч 1

-

-1

-1

-2

-1

-2

-3

-2

-4

-3

Advertising