Sony CDX-GT470UM Manuel d'utilisation

Page 17

Advertising
background image

17

*1 Does not appear when “SET F/R POS” is set to

“OFF.”

*2 When the audio output is set to “SUB-OUT”

(page 16).

*3 Does not appear when the tuner is selected.

*4 When the audio output is set to “REAR-

OUT” and “SW DIREC” is set to “OFF.”

*5 When the audio output is set to “REAR-

OUT” and “RBE MODE” is set to “OFF.”

*6 When the AUX is selected.

DISPLAY:

* When the CD or USB is selected.

S.WOOFER

*

2

(Subwoofer)

SW LEVEL

(Subwoofer Level)

Adjusts the subwoofer volume level:
“+10 dB” – “0 dB” – “–10 dB.”
(“ATT” is displayed at the lowest
setting.)
SW PHASE

(Subwoofer Phase)

Selects the subwoofer phase: “NORM,”
“REV.”
SW POS

*

1

(Subwoofer Position)

Selects the subwoofer position: “NEAR,”
“NORMAL,” “FAR. ”
LPF FREQ

(Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency:
“50Hz,” “60Hz,” “80Hz,” “100Hz,”
“120Hz.”
LPF SLOP

(Low Pass Filter Slope)

Selects the LPF slope: “1,” “2,” “3.”

HPF

(High Pass Filter)

HPF FREQ

(High Pass Filter Frequency)

Selects the front/rear speaker cut-off
frequency: “OFF,” “50Hz,” “60Hz,”
“80Hz,” “100Hz,” “120Hz.”
HPF SLOP

(High Pass Filter Slope)

Selects the HPF slope (effective only
when HPF FREQ is set to other than
“OFF”): “1,” “2,” “3.”

AUX VOL

*

6

(AUX Volume level)

Adjusts the volume level for each
connected auxiliary equipment:
“+18 dB” – “0 dB” – “–8 dB.”
This setting negates the need to adjust
the volume level between sources.

DEMO

(Demonstration)

Activates the demonstration: “ON,”
“OFF.”

DIMMER

Changes the display brightness: “ON,”
“OFF.”

AUTO SCR

* (Auto Scroll)

Scrolls long items automatically: “ON,”
“OFF.”

M.DISPLAY

(Motion Display)

– “SA”: to show moving patterns and

spectrum analyzer.

– “OFF”: to deactivate the Motion Display.

Advertising