Error displays/messages – Sony CDX-GT730UI Manuel d'utilisation

Page 26

Advertising
background image

26

E:\JOB\eV\Master(CDX)\DTP\848319S_CDX-
GT730UI(U)\1008_Saishin\4125268111\4125268111CDXGT730UIU\01US02CD-
U.fm

masterpage:Left

CDX-GT730UI

4-125-268-11 (1)

Error displays/Messages

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• The connection is not correct.

t Connect a power antenna (aerial) control lead

(blue) or accessory power supply lead (red) to the
power supply lead of a car’s antenna (aerial)
booster (only when your car has built-in FM/AM
antenna (aerial) in the rear/side glass).

t Check the connection of the car antenna (aerial).
t If the auto antenna (aerial) will not go up, check

the connection of the power antenna (aerial)
control lead.

t When the DSO mode is on, the sound is

sometimes hampered by noises.
Set the DSO mode to “off” (page 17).

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Set “Local on” (page 19).

t Tuning does not stop at a station:

Set “Local off” (page 19).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set “Mono on” (page 19).

An FM program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Set “Mono off” (page 19).

USB playback

You cannot play back items via a USB hub.

This unit cannot recognize USB devices via a USB
hub.

Cannot play back items.

A USB device does not work.
t Reconnect it.

The USB device takes longer to play back.

The USB device contains files with a complicated tree
structure.

A beep sounds.

During playback, the USB device has been
disconnected.
t Before disconnecting a USB device, make sure to

stop playback first for data protection.

The sound is intermittent.

The sound may be intermittent at a high-bit-rate of
more than 320 kbps.

Checking

The unit is confirming the connection of a USB device.
t Wait until confirming the connection is finished.

Error*

1

• The disc is dirty or inserted upside down.*

2

t Clean or insert the disc correctly.

• A blank disc has been inserted.
• The disc cannot play due to a problem.

t Insert another disc.

• USB device was not automatically recognized.

t Reconnect it again.

• Press Z to remove the disc.

Failure (Illuminates until any button is pressed.)

The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this

model to check the connection.

Failure (Illuminates for about 1 second.)

When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to

store, then try it again.

Hubs Not Supported

USB hub is not supported on this unit.

Load

The CD changer is loading the disc.
t Wait until loading is complete.

Local Seek +/–

The local seek mode is on during automatic tuning.

NO Device

(SOURCE) is selected without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.

NO Disc

The disc is not inserted in the CD changer.
t Insert discs in the CD changer.

NO Magazine

The disc magazine is not inserted in the CD changer.
t Insert the disc magazine in the CD changer.

NO Music

The disc or USB device does not contain a music file.
t Insert a music CD in this unit or an MP3 playable

CD changer.

t Connect a USB device with a music file in it.

Not Supported

The connected USB device is not supported.
t For details on the compatibility of your USB

device, visit the support site.

Offset

There may be an internal malfunction.
t Check the connection. If the error indication

remains on in the display, consult your nearest
Sony dealer.

Advertising