Sony PCV-LX810 - Manuel (Page 25)

Identifying Components 11
PHONE, LINE IN, and MIC Connectors
The PHONES, LINE IN, and MIC jacks are physically identical, but have
different connections. They are standard 3.5 mm stereo mini-jacks and are
located on the rear panel.
i.LINK (IEEE1394) Connector
The 6-pin i.LINK (IEEE1394) connector on the rear panel can supply power
from the computer to a device if the device also has a 6-pin i.LINK connector.
The connector supplies 10 V to 12 V. The total power supplied by the 6-pin
i.LINK connector cannot exceed 6 watts.
Connector Description
PHONES 1.0 Vrms output (typical) at 31 mW (32 ohm) output (max).
LINE IN 2.0 Vrms input (max), 50 Kohm impedance.
MIC Electret condenser microphone input.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394
connection. The i.LINK connection may vary, depending on the software applications,
operating system and compatible i.LINK devices. All products with an i.LINK connection may
not communicate with each other.
✍
Refer to the documentation that came with your compatible i.LINK device for information on
operating conditions and proper connections. Before connecting compatible i.LINK PC
peripherals to your system, such as an optical disc drive or a hard disk drive, confirm their
operating system compatibility and required operating conditions.
PHONES
LINE IN
MIC