Other functions, Changing the sound settings, Adjusting the sound characteristics - bal/fad/sub – Sony CDX-GT420U Manuel d'utilisation

Page 11: Customizing the equalizer curve - eq3, Adjusting setup items - set, Adjusting setup items — set, Other functions changing the sound settings, Adjusting the sound characteristics — bal/fad/sub, Customizing the equalizer curve — eq3

Advertising
background image

11

Other functions

Changing the sound settings

Adjusting the sound
characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer
volume.

1

Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:

LOW*

1

t MID*

1

t HI*

1

t

BAL (left-right)

t FAD (front-rear) t

SUB (subwoofer volume)*

2

t AUX*

3

*1 When EQ3 is activated (page 11).
*2 When the audio output is set to “SUB”

(page 11).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 21 steps.

*3 When AUX source is activated (page 12).

2

Rotate the control dial to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Customizing the equalizer curve
— EQ3

“CUSTOM” of EQ3 allows you to make your
own equalizer settings.

1

Select a source, then press (EQ3)
repeatedly to select “CUSTOM.”

2

Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.

3

Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.

Tip
Other equalizer types are also adjustable.

Adjusting setup items — SET

1

Press and hold the select button.
The setup display appears.

2

Press the select button repeatedly
until the desired item appears.

3

Rotate the control dial to select the
setting (example “ON” or “OFF”).

4

Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.

Note
Displayed items will differ, depending on the source
and setting.

The following items can be set (follow the page
reference for details):

z

” indicates the default settings.

CLOCK-ADJ (Clock Adjust) (page 4)

BEEP

To set “BEEP-ON” (

z

) or “BEEP-OFF.”

AUX-A*

1

(AUX Audio)

To turn the AUX source display “AUX-A-ON”
(

z

) or “AUX-A-OFF” (page 12).

A.OFF (Auto Off)

To shut off automatically after a desired time
when the unit is turned off.
– “A.OFF-NO” (

z

), “A.OFF-30S (Seconds),”

“A.OFF-30M (Minutes)” or “A.OFF-60M
(Minutes).”

SUB/REAR*

1

To switch the audio output.

– “SUB-OUT” (

z

): to output to a subwoofer.

– “REAR-OUT”: to output to a power amplifier.

DEMO (Demonstration)

To set “DEMO-ON” (

z

) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.
– “DIM-ON”: to dim the display.
– “DIM-OFF” (

z

): to deactivate the dimmer.

M.DSPL (Motion Display)

To select the Motion Display mode.
– “M.DSPL-SA” (

z

): to show moving patterns

and spectrum analyzer.

– “M.DSPL-OFF”: to deactivate the Motion

Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically
when the disc/album/track is changed.
– “A.SCRL-ON” (

z

): to scroll.

– “A.SCRL-OFF”: to not scroll.

continue to next page

t

Advertising