Sony IPT-DS1 - Manuel (Page 59)

23-GB
About MENU mode
If you press the MENU button during automatic shooting, rotation stops temporarily
and this unit enters MENU mode.
In MENU mode, you can change the rotation angle, shooting frequency and flash
settings of automatic shooting.
Tips ¼
This section describes how to use this unit with the DSC-TX1. The illustrations show
DSC-TX1 screens.
1 Press the MENU button on this unit.
It tilts forward and enters MENU mode.
Tips ¼
To return to automatic shooting mode
Press the MENU button again or the  mark at the top right of the LCD of your
camera.
If you change the settings, this unit automatically returns to automatic shooting mode.
2 Select a MENU item on the camera.
Operation differs depending on your camera.
DSC-TX1: Touch icons on the screen.
DSC-WX1: Select items with the control buttons on your camera.
For details, refer to the operating instructions of your camera.
ˎ
MENU item Description
Selects rotation angle (page 24).
Selects shooting frequency (page 25).
Selects flash setting (page 25).
Notes ¦
Your camera automatically turns off to save the batteries when the camera is not
ˎ
operated for more than 2 minutes during MENU mode.
For DSC-WX1 users
ˎ
Before attaching your camera to this unit, check the flash settings of your
camera. You cannot change the settings after it is attached to this unit.