Sony IPT-DS1 Manuel d'utilisation

Page 49

Advertising
background image

13-GB

 Place the plate on the base with the multi connector through the hole.

The Sony logos on the main unit and plate should read in the same direction

ˎ

when the plate is attached to the main body.

The plate and tilt arm have guide markers which should be aligned when

ˎ

attaching.

On the plate:

Position marker A ( ), position marker B ( )

On the tilt arm:

Position marker C ( )

When placing the plate on the tilt arm, align the marker A (

ˎ

) on the plate

with the marker C ( ) on the tilt arm.

Position marker C ( )

Position marker A (

)

 Slide the plate until the marker B ( ) on it is aligned with the marker C ( )

on the tilt arm.

Make sure that the plate is properly seated.

ˎ

Position marker C ( )

Position marker B ( )

The plate clicks into place when inserted to the correct position.

If it is slightly raised, remove it and repeat the above steps to attach it.

ˎ

Advertising