Sony MEX-1HD - Manuel (Page 49)

49
Adjusting the cut-off frequency for the
front/rear speakers
To match the characteristics of the installed
speaker system, you can select the cut-off
frequency of the speakers.
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select “FAD,” then
press the L dial.
4
Press (F2) (HPF).
5
Rotate the L dial to select the cut-off
frequency.
As you rotate the L dial, the frequency
changes as follows:
off (default setting) y 78Hz y 125Hz
6
Press the L dial.
The normal display appears.
Adjusting the subwoofer
volume
— SUB
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select “SUB,” then
press the L dial.
4
Rotate the L dial to adjust the volume.
The level is adjustable from –
∞ , –10 to +10
steps.
5
Press the L dial.
The normal display appears.
Cut-off frequency
Frequency (Hz)
L
evel
off
continue to next page t
SOURCE
F2 L dial