Sony MEX-1HD - Manuel (Page 46)

46
Setting the Dynamic
Soundstage Organizer
— DSO
If your speakers are installed into the lower part
of the doors, sound will come from below and
may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers over the dashboard (virtual
speakers).
You can store the DSO setting for each source.
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select “DSO,” then
press the L dial.
4
Rotate the L dial to select “On,” then
press the L dial.
The normal display appears.
To cancel the DSO function
Select “Off” in step 4.
Tips
• Depending on the type of car interior or type of
music, DSO may not have a desirable effect.
• If FM broadcasts are difficult to hear, set DSO to
“Off.”
Setting the equalizer
— EQ7
You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, New Age, Rock,
and Custom).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source.
2
Press the L dial.
The sound list display appears.
3
Rotate the L dial to select “EQ7,” then
press the L dial.
4
Rotate the L dial to select the desired
equalizer curve.
As you rotate the L dial, the equalizer curve
type changes as follows:
Off y Xplod y Vocal y Club y
Jazz y New Age y Rock y Custom
y Off
5
Press the L dial.
The normal display appears.
To cancel the equalizing effect
Select “Off” in step 4.
Note
When DSO is set to “On,” equalizer settings are
automatically adjusted for best overall effect.
SOURCE
L dial
F2
F3
SOURCE
L dial