Sony MSAC-US7 - Manuel (Page 14)

14-US
12
Click “Install.”
The installation begins. You may see “Installing Microsoft DirectX”
displayed.
13
Confirm that the DirectX setup screen is displayed, then click
“OK.”
The computer will be restarted.
The “PIXELA ImageMixer for Sony” will be enabled after you reboot
your computer.
14
Remove the CD-ROM from the CD-ROM drive.
Connecting the unit to a personal computer
1
Connect the plug from the USB cable of this unit to the USB
jack of your computer.
When the computer recognizes this unit, the “Add New Hardware
Wizard” will start.
P Notes
• Two types of drivers will be installed, so the “Add New Hardware Wizard”
will start twice. Do not stop the process in the middle, and continue the
installation of the software until the entire process is completed, as described
below.
• Depending on your computer, the Windows 98/98SE CD-ROM may be
needed as well.
• The location of the USB jack differs depending on your computer.
• If you are using a computer with more than one USB jack, do not connect any
devices other than a standard mouse and a keyboard to the main computer
when using this unit. Also, when using a desktop computer, connect this unit
directly to one of the computer's USB jacks. For more details, see page 17,
[Recommended connections].
For Windows (continued)