Sony CDX-L250 Manuel d'utilisation

Fm / am compact disc player, 12 b, Cdx-l250

Advertising
background image

Sony Corporation © 2001

Printed in Korea

CDX-L250

3-227-609-11

(1)

Equipment used in illustrations (not supplied)
Appareils utilisés dans les illustrations (non fournis)

Parts Iist (1)

The numbers in the list are keyed to those in the
instructions.

Caution

Handle the bracket 1 carefully to avoid injuring
your fingers.

Cautions

• This unit is designed for negative earth 12 V

DC operation only.

• Do not get the wires under a screw, or caught

in moving parts (e.g. seat railing).

• Before making connections, disconnect the

earth terminal of the car battery to avoid short
circuits.

• Connect the yellow and red power input leads

only after all other leads have been connected.

Run all earth wires to a common earth

point.

• Be sure to insulate any loose unconnected

wires with electrical tape for safety.

•The use of optical instruments with this

product will increase eye hazard.

Notes on the power supply cord (yellow)
• When connecting this unit in combination with

other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

Connection example (2)

Notes (2-B)
• Be sure to connect the earth cord before

connecting the amplifier.

• If you connect an optional power amplifier and do

not use the built-in amplifier, the beep sound will

1

2

B

1

2

Ч

4

3

4

5

7

8

6

Ч

2

Power amplifier
Amplificateur de puissance

Front speaker
Haut-parleur frontal

Rear speaker
Haut-parleur arrière

AUDIO OUT

A

Installation/Connections

Installation/Connexions

FM/AM
Compact Disc
Player

be deactivated.

Connection diagram (3)

1

To a metal surface of the car
First connect the black earth lead, then
connect the yellow and red power input
leads.

2

To the power antenna control lead or power
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if

there is no power antenna or antenna
booster, or with a manually-operated
telescopic antenna.

• When your car has a built-in FM/AM

antenna in the rear/side glass, see “Notes
on the control and power supply leads.”

3

To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers.
Connecting any other system may damage
the unit.

4

To the +12 V power terminal which is
energized in the accessory position of the
ignition key switch
Notes
• If there is no accessory position, connect to

the +12 V power (battery) terminal which is
energised at all times.
Be sure to connect the black earth to it first.

• When your car has a built-in FM/AM

antenna in the rear/side glass, see “Notes
on the control and power supply leads.”

5

To the +12 V power terminal which is
energised at all times
Be sure to connect the black earth to it first.

Notes on the control and power supply leads
• The power antenna control lead (blue) supplies

+12 V DC when you turn on the tuner.

• When your car has built-in FM/AM antenna in

the rear/side glass, connect the power antenna
control lead (blue) or the accessory power
input lead (red) to the power terminal of the
existing antenna booster. For details, consult
your dealer.

9

Advertising