Removing the unit – Sony CDX-M8815X Manuel d'utilisation

Page 15

Advertising
background image

15

When the battery becomes weak, the range of the
card remote commander becomes shorter. Replace
the battery with a new CR2025 lithium battery. Use
of any other battery may present a risk of fire or
explosion.

Notes on the lithium battery
Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately
consult a doctor.

Wipe the battery with a dry cloth to assure a good

contact.

Be sure to observe the correct polarity when

installing the battery.

Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.

Removing the unit

1

Remove the protection collar.

1

Engage the release keys together with the
protection collar.

2

Pull out the release keys to remove the
protection collar.

2

Remove the unit.

1

Insert both release keys simultaneously
until they click.

2

Pull the release keys to unseat the unit.

3

Slide the unit out of the mounting.

x

+ side up

WARNING

Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.

Fuse (10A)

Orient the release
keys as shown.

Hook facing
inwards.

Advertising
Ce manuel est liée aux produits suivants: