Labeling a station/disc, Adjusting menu items - menu, Adjusting menu items — menu – Sony CDX-M8815X Manuel d'utilisation
Page 10
10
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press
(MENU)
twice.
The setting is complete and the display
returns to normal play/reception mode.
Labeling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 12).
1
While receiving a station or playing a
disc that you want to label, press
(MENU)
.
2
Press
M
or
m
repeatedly until “Name
Edit” appears, then press
(ENTER)
.
3
Press
M
or
m
repeatedly until the
desired character appears.
The character changes as follows:
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
...
y
(blank
space)
y
A
To move the digital indication, press the
<
or
,.
Repeat this operation until the entire name is
entered.
4
Press
(ENTER)
.
The labeling is complete and the display
returns to normal reception/play mode.
To display the name, press (DSPL) during
reception/playback.
Tips
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-Track” and all shuffle play are suspended until
the labeling is complete.
Deleting the custom name
1
Select the radio, or the unit that has stored the
custom name you want to delete, then press
(MENU).
2
Press
M or m repeatedly until “Name Delete”
appears, then press (ENTER).
The stored name will appear.
3
Press
M or m repeatedly to select the name you
want to delete.
4
Press and hold (ENTER).
The name is deleted. Repeat steps 3 and 4 if
you want to delete other names.
5
Press (MENU) twice.
The unit returns to normal reception/play
mode.
Adjusting menu items — MENU
You can adjust various menu settings by using
the 4 arrow buttons on the card remote
commander.
1
Press
(MENU)
.
2
Press
M
or
m
repeatedly until the
desired item appears.
3
Press
<
or
,
to select the desired
setting (example: “on” or “off”).
4
Press
(ENTER)
.
The setting is complete and the display
returns to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
Tip
You can easily switch among categories by pressing
and holding
M
or
m
.
DISC
–
SOURCE
DISC
+
SEEK
+
SEEK
–