Listening to music – Sony DR-BT140Q Manuel d'utilisation

Page 14

Advertising
background image

14

US

Check the following before
operating the unit.
– The Bluetooth device is turned

on.

– Pairing of this unit and the

Bluetooth device is complete.

– The Bluetooth device supports the

transmitting music function
(profile: A2DP*).

1

Press and hold the
POWER button for
about 2 seconds while
the unit is turned off.

The indicator (blue) and
indicator (red) flash together
twice and the unit is turned on.

Note

After the unit is turned on, the unit
attempts to connect to the last
connected Bluetooth device
automatically with HFP or HSP.

Listening to music

When not calling with this unit, do
not make the last connected
Bluetooth device ready for HFP or
HSP connection. To make or receive
a call while playing back music, see
page 20.

2

Make the Bluetooth
connection (A2DP) from
a Bluetooth device to
this unit.

Refer to the operating
instructions supplied with the
Bluetooth device on how to
operate it.

3

Start playback on the
Bluetooth device.

Tip

Bluetooth connection of A2DP
(Advanced Audio Distribution Profile)
can also be operated with the jog switch
from this unit to the Bluetooth device
except when making a call on this unit.

Notes

• When you play music by connecting the

unit to a Bluetooth device using HSP
(Headset Profile), sound quality will not
be high. For better sound, change the
Bluetooth connection to A2DP by
operating the Bluetooth device.

• If this unit is turned off while an A2DP

Bluetooth connection is established,
operate the unit again from step 1 to
make the A2DP Bluetooth connection
again.

* For detail on profiles, see page 4.

OPERATING THE UNIT

POWER button

VOL – button

VOL + button

>

.

Nx

Advertising