Precautions – Sony STR-DA4400ES Manuel d'utilisation

Page 135

Advertising
background image

135

GB

A

d

ditio

n

al Inf

o

rm

ati
o

n

Precautions

On safety

Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.

On power sources

• Before operating the receiver, check that the

operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.

• The unit is not disconnected from the AC

power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.

• If you are not going to use the receiver for a

long time, be sure to disconnect the receiver
from the wall outlet. To disconnect the AC
power cord (mains lead), grasp the plug
itself; never pull the cord.

• One blade of the plug is wider than the other

for the purpose of safety and will fit into the
wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact
your dealer.

• AC power cord (mains lead) must be

changed only at a qualified service shop.

On heat buildup

Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.

On placement

• Place the receiver in a location with adequate

ventilation to prevent heat buildup and
prolong the life of the receiver.

• Do not place the receiver near heat sources,

or in a place subject to direct sunlight,
excessive dust, or mechanical shock.

• Do not place anything on top of the cabinet

that might block the ventilation holes and
cause malfunctions.

• Do not place the receiver near equipment

such as a television, VCR, or tape deck. (If
the receiver is being used in combination
with a television, VCR, or tape deck, and is
placed too close to that equipment, noise
may result, and picture quality may suffer.
This is especially likely when using an
indoor antenna (aerial). Therefore, we
recommend using an outdoor antenna
(aerial).)

On operation

Before connecting other components, be sure
to turn off and unplug the receiver.

On cleaning

Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.

If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.

Advertising