Sony STR-DA4400ES - Manuel (Page 129)

129 GB
Us
ing th
e
Re
m
o
te
1
Press AMP.
The AMP button lights up, and then turns
off.
2
Press MACRO 1 or MACRO 2 to
start the macro.
The macro starts and execute the
commands in the order you assigned
them. While the commands are being
sent, the AMP button flashes and the RM
SET UP button lights up. When the
commands have been sent, the RM SET
UP and AMP buttons turn off.
To erase a programmed macro
1 Press MACRO 1 or MACRO 2 for more
than 1 second while pressing RM SET
UP to clear the stored macro.
The RM SET UP button flashes.
2 Press RM SET UP.
Settings stored as macro are cleared.
Setting remote
commander codes that
are not stored in the
remote
Even if a remote commander code is not one of
the presets stored in the remote, it is possible
for the remote to learn the code using the
learning function.
Note
When setting up the receiver to learn the remote
command modes, replace the batteries with new
ones.
Example for storing a new commander code
for the numeric button 1 when the VIDEO2
input is selected.
1
Press THEATER while pressing
RM SET UP.
The RM SET UP button lights up.
2
Press the input button (VIDEO2
in the example) for the
component you want to operate
with the new command.
The input button flashes. (The RM SET
UP button remains lit.)
Starting macro play
THEATER
Numeric
buttons
SHIFT
RM SET
UP
Input
buttons
continued