Figure 1 – Sony STR-DA4400ES Manuel d'utilisation
Page 114
114
GB
Figure 1
z : Video signals are converted and output through the video converter.
a : The same type of signal as that of the input signal is output. Video signals are not converted.
– : Video signals are not output.
a)The resolution is set automatically, depending on the connected monitor.
b)When the TV is connected to jacks other than the HDMI jacks, 480i/576i signals are output when
“Resolution” is set to “AUTO.”
c)480p/576p signals are output even if 480i/576i is set.
d)Video signals without copyright protection are output based on the settings menu. Video signals with
copyright protection are output as 480p.
Notes
• Video signals are not output from the COMPONENT VIDEO MONITOR OUT or MONITOR VIDEO OUT
jacks when the monitor, etc., is connected to the HDMI OUT jack.
• If you select a resolution that the connected TV does not support in the “Resolution” menu, the images from
the TV cannot be output correctly.
• Converted HDMI image output signals do not support “x.v.Color (x.v.Colour).”
• Converted HDMI image output signals do not support Deep Color.
“Resolution”
menu setting
HDMI OUT jack
MONITOR
COMPONENT
VIDEO OUT jacks
MONITOR VIDEO
OUT jack
DIRECT
Component video
–
a
–
Composite video
–
–
a
AUTO
(initial setting)
Component video
z
a)
z
b)
z
b)
Composite video
z
b)
z
b)
480i/576i
Component video
z
c)
z
z
Composite video
z
c)
z
z
480p/576p
Component video
z
z
–
Composite video
z
z
a
720p, 1080i
Component video
z
z
d)
–
Composite video
z
z
d)
a
1080p
Component video
z
a
–
Composite video
z
–
a
Input signals
Output from