Eq settings, Enhanced sur mode – Sony STR-DA4400ES Manuel d'utilisation

Page 110

Advertising
background image

110

GB

You can select the decoding mode for the
sound field.
For details on the decoding modes available,
see “Setting a multi-channel surround sound
effect” (page 75)
.

x PLII

Performs Dolby Pro Logic II decoding. A
source recorded in 2 channel format is
decoded into 5.1 channels.

x PLIIx

Performs Dolby Pro Logic IIx decoding.

x Neo:6 Cinema

Performs DTS Neo:6 Cinema mode decoding.

x Neo:6 Music

Performs DTS Neo:6 Music mode decoding.
This setting is ideal for normal stereo sources
such as CDs.

x NEURAL-THX

Next generation of Neural-THX

®

Surround. In

addition to stereo enhancement processing and
pure discrete 5.1 surround sound, now capable
of full 360° 7.1 surround sound playback from
Neural-THX

®

surround encoded content.

Note

You can select “PLII” when there is no surround
back speaker on the Speaker Pattern menu, while
you can select “PLIIx” when there is a surround
back speaker. You cannot select both settings at the
same time.

EQ settings

You can use following parameters to adjust the
tonal quality (bass/treble level) of front, center
and surround back speakers.

Notes

• This function does not work in the following cases.

– The multi-channel input is selected.
– Sound Field is set to “2ch Analog Direct.”

• This function does not work when Dolby TrueHD

signals with a sampling frequency of higher than
96 kHz are being received.

• If the equalizer is adjusted while the receiver is

receiving signals with a sampling frequency of
higher than 96 kHz, the signals will always be
played back at either 44.1 kHz or 48 kHz.

To adjust the equalizer on the
EQ screen

1

Press

B/b to select the speaker on the

screen you want to adjust, then press

.

2

Press

B/b to select “Bass” or “Treble.”

3

Press

V/v to adjust the gain, then press

.

Enhanced Sur Mode

Level
(dB)

Bass

Treble

Frequency
(Hz)

Advertising