Manual setup – Sony STR-DA4400ES Manuel d'utilisation

Page 106

Advertising
background image

106

GB

You can adjust each speaker manually on the
Manual Setup screen. You can also adjust the
speaker levels after the auto calibration is
completed.

To adjust the speaker level

You can adjust each speaker’s level (center,
surround left/right, surround back left/right,
subwoofer).

1

Press

V/v/B/b repeatedly to select the

speaker on the screen for which you
want to adjust the level, then press

.

2

Press

B/b repeatedly to select “Level:,”

then press

.

3

Press

V/v to set the level of the

selected speaker, then press

.

You can adjust the level from –20 dB to
+10 dB in 0.5 dB steps.
For the front left/right speakers, you can
adjust the balance on either side. You can
adjust the front left level from FL–10.0 dB
to FL+10.0 dB in 0.5 dB steps. You can
also adjust the front right level from
FR–10.0 dB to FR+10.0 dB in 0.5 dB
steps.

Note

When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to “LARGE.” However, the sound
will be output from the subwoofer if the digital input
signal contains L.F.E. signals, or if the front or
surround speakers are set to “SMALL,” the sound
field for movie is selected, or “Portable Audio” is
selected.

To adjust the distance from the
seating position to each
speaker

You can adjust the distance from the seating
position to each speaker (front left/right,
center, surround left/right, surround back left/
right, subwoofer.)

1

Press

V/v/B/b repeatedly to select the

speaker on the screen for which you
want to adjust the distance from the
seating position, then press

.

2

Press

B/b repeatedly to select a

“Distance:,” then press

.

3

Press

V/v to set the distance of the

selected speaker, then press

.

You can adjust the distance from 3 feet 3
inches to 32 feet 9 inches (1.0 meter to 10.0
meters) in 1 inch (1 cm) steps.

To adjust the size of each
speaker

You can adjust each speaker’s (front left/right,
center, surround left/right, surround back left/
right) size.

1

Press

V/v/B/b repeatedly to select the

speaker on the screen for which you
want to adjust the size, then press

.

2

Press

B/b repeatedly to select a “Size:,”

then press

.

3

Press

V/v to set the size of the selected

speaker, then press

.

• LARGE

If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE.” Normally, select
“LARGE.”

• SMALL

If the sound is distorted, or you feel a lack
of surround effects when using multi-
channel surround sound, select
“SMALL” to activate the bass redirection
circuitry and output the bass frequencies
of each channel from the subwoofer or
other “LARGE” speakers.

Manual Setup

Advertising