Sony PCG-Z505LEK - Manuel (Page 36)

Using the Floppy Disk Drive
35
Using the Floppy Disk Drive
You can connect the floppy disk drive to the (USB) connector on your
computer.
To connect the floppy disk drive
❑ Plug the USB cable from the floppy disk drive into the (USB) connector
on the computer. The VAIO logo on the disk drive should be facing up.
✍
You do not need to shut down the computer before connecting or disconnecting the
floppy disk drive. Before removing the FDD, see “To remove the floppy disk drive when
the computer is on” .
Connecting the FDD
✍
To use two USB devices at the same time, plug the second device into the (original
mini USBconnector) on the left side of the computer, using the supplied conversion
adapter.
To boot your computer from a floppy disk you must connect the floppy disk drive to
the USB port on right side of the computer as shown above.
Floppy disk drive
(supplied)
Attached USB cable
USB connector