Sony PCG-Z505LEK - Manuel (Page 22)

Connecting a Power Source
21
Connecting a Power Source
You can use either AC power or a rechargeable battery pack as a power source.
Using the AC Adapter
1 Plug the cable attached to the AC adapter (PCGA-AC19V1) into the DC In
connector on the computer.
2 Plug one end of the power cord into the AC adapter.
3 Plug the other end of the power cord into an AC outlet.
Warning: Only connect 10BASE-T and 100BASE-TX cables to the (Ethernet
network) port. Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric current
overload and could cause a malfunction, excessive heat, or fire in the connector.
To connect the unit to the network, contact your network administrator.
Bottom
1 Battery release lever
2 Battery lock lever
3
Reset switch