Sony VPL-5400ES - Manuel (Page 122)

122 GB
Lets you select the language you want to listen
to during a digital broadcast. This feature only
functions for Dolby Digital sources.
x MAIN/SUB
Sound of the main language will be output
through the front left speaker, and sound of the
sub language will be output through the front
right speaker simultaneously.
x MAIN
Sound of the main language will be output.
x SUB
Sound of the sub language will be output.
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks or
HDMI IN jacks.
x PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format.
In this case, set this item to “AUTO.”
When signals from the HDMI IN jack are
selected, only PCM signals are output from the
connected player. When signals in any other
format are received, set this item to “AUTO.”
x AUTO
Automatically switches the input mode
between Dolby Digital, DTS, DSD or PCM.
Note
Even when “Decode Priority” is set to “PCM,” the
sound may be interrupted at the very beginning of
the first track due to signals on the CD being played
back.
Video settings
Makes settings for video.
Lets you convert the resolution of analog video
input signals.
For details on video input/output conversion
classified according to the Resolution menu
settings, see Figure 1 on page 123.
x AUTO
x DIRECT
Lets you output analog video input signals
without conversion.
x 480i/576i
x 480p/576p
x 720p
x 1080i
x 1080p
Lets you convert the resolution of analog video
input signal in zone 2.
For details on video input/output conversion
classified according to the Zone Resolution
menu settings, see Figure 2 on page 124.
x 480i/576i
x 480p/576p
x 720p
x 1080i
Dual Mono (Digital broadcast
language selection)
Decode Priority (Digital audio
input decoding priority)
Resolution (Converting video
signals)
Zone Resolution