Eq settings, Enhanced sur mode – Sony VPL-5400ES Manuel d'utilisation

Page 119

Advertising
background image

119

GB

Ad
justi

ng Se

ttings

You can select the decoding mode for the
sound field.
For details on the decoding modes available,
see “Setting a multi-channel surround sound
effect” (page 81).

x PLII

Performs Dolby Pro Logic II decoding. A
source recorded in 2 channel format is
decoded into 5.1 channels.

x PLIIx

Performs Dolby Pro Logic IIx decoding. A
source recorded in 2 channel or 5.1 channel
format is decoded into 7.1 channels.

x Neo:6 Cinema

Performs DTS Neo:6 Cinema mode decoding.
A source recorded in 2 channel format is
decoded into 7 channels.

x Neo:6 Music

Performs DTS Neo:6 Music mode decoding.
A source recorded in 2 channel format is
decoded into 7 channels. This setting is ideal
for normal stereo sources such as CDs.

x NEURAL-THX

Next generation of Neural-THX

®

Surround. In

addition to stereo enhancement processing and
pure discrete 5.1 surround sound, now capable
of full 360° 7.1 surround sound playback from
Neural-THX

®

surround encoded content.

Note

You can select “PLII” when there is no surround
back speaker on the Speaker Pattern menu, or you
can select “PLIIx” when there is a surround back
speaker. You cannot select both settings at the same
time.

EQ settings

You can use following parameters to adjust the
tonal quality (bass/treble level) of front, center
and surround back speakers.

Notes

• This function does not work in the following cases.

– The multi-channel input is selected.
– Sound Field is set to “2ch Analog Direct.”

• This function does not work when Dolby TrueHD

signals with a sampling frequency of higher than
96 kHz are being received.

• If the equalizer is adjusted while the receiver is

receiving signals with a sampling frequency of
higher than 96 kHz, the signals will always be
played back at either 44.1 kHz or 48 kHz.

To adjust the equalizer on the
EQ screen

1

Press

B/b to select the speaker on the

screen you want to adjust, then press

.

2

Press

B/b to select “Bass” or “Treble.”

3

Press

V/v to adjust the gain, then press

.

Enhanced Sur Mode

Level
(dB)

Bass

Treble

Frequency
(Hz)

Advertising
Ce manuel est liée aux produits suivants: