Switching the command mode of the receiver, And the remote – Sony VPL-5400ES Manuel d'utilisation

Page 108

Advertising
background image

108

GB

• Only digital input signals are output from the

digital output jack (for recording).

• HDMI sound cannot be recorded.

Switching the command
mode of the receiver and
the remote

You can switch the command mode
(COMMAND MODE AV 1 or COMMAND
MODE AV 2) of the receiver and the remote.
Switch the command mode from the initial
setting to the appropriate setting, if other Sony
component is operated accidentally by the
same remote, when you are operating the
receiver using the remote supplied with the
receiver.
The command modes of both the receiver and
the remote are those of the initial setting
(COMMAND MODE AV 2).
The receiver and the remote, on the contrary,
should use the same command mode. If the
command modes of the receiver and the
remote are different, you cannot use the
remote to operate the receiver.

Advertising
Ce manuel est liée aux produits suivants: