Sony VPL-5400ES - Manuel (Page 92)

92 GB
ZONE 2 VIDEO OUT (RJ45 jack) is used only for custom installation by a qualified person.
ZONE 2 VIDEO OUT (RJ45 jack) is a jack that sends a source video signal to the component video
input for zone 2. For details, consult your dealer.
Note
This jack is not for an Ethernet LAN connection.
ZONE 2 VIDEO OUT (RJ45 jack) connection
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
Note
CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and may void your
warranty.
RJ45 Video Pinout
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ45 jack)
Component Video Balun
CAV-CVB1
ZONE 2 VIDEO OUT
(RJ45 jack)
CAT5 cable Component video
cable
TV
monitor
Zone 2
Pinout Wire color
A Pin 1
BLUE/Pb (R) White/Orange
B Pin 2 BLUE/Pb (T) Orange
C Pin 3 GREEN/Y (R) White/Green
D Pin 4 GND Blue
E Pin 5
+11V White/Blue
F Pin 6
GREEN/Y (T) Green
G Pin 7
RED/Pr (R) White/Brown
H Pin 8 RED/Pr (T) Brown