Video – Sony VPL-5400ES Manuel d'utilisation

Page 149

Advertising
background image

149

GB

A

d

ditio

n

al Inf

o

rm

ati
o

n

• Adjust the speaker level (page 115).
• Make sure the center/surround speaker (s)

is (are) set to either “SMALL” or
“LARGE.”

There is no sound from the surround
back speakers.

• Some discs have no Dolby Digital

Surround EX flag even though the
packages have Dolby Digital Surround EX
logos.

There is no sound from the subwoofer.

• Check that the subwoofer is connected

correctly and securely.

• Make sure you have turned on your

speaker.

• When all speakers are set to “LARGE”

and “Neo:6 Cinema,” or “Neo:6 Music” is
selected, there is no sound from the
subwoofer.

The surround effect cannot be
obtained.

• Make sure the sound field function is on

(press MOVIE or MUSIC).

• Sound fields do not function only for

signals with a sampling frequency of
higher than 48 kHz.

Dolby Digital or DTS multi-channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
make sure the setting for the digital audio
output of the connected component is
available.

Recording cannot be carried out.

• Check that the components are connected

correctly (page 29).

• Select the source component (page 58).

The MULTI CHANNEL DECODING lamp
does not light up in blue.

• Check that the playback component is

connected on a digital jack and the input is
selected properly on this receiver.

• Check whether the input source of the

software being played back corresponds to
the multi-channel format.

• Check whether the setup on the playback

component is set to multi-channel sound.

• Check to make sure the selected audio

(digital) input jack is not assigned to other
inputs in “Input Assign” in the Input menu
(page 103).

There is no sound from the component
connected to the DIGITAL MEDIA PORT
adapter.

• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter

and/or component is not connected
correctly. Turn off the receiver, then
reconnect the DIGITAL MEDIA PORT
adapter and/or component.

• Check the DIGITAL MEDIA PORT

adapter and/or component device to make
sure it supports this receiver.

There is no picture or an unclear
picture appears on the TV screen or
monitor.

• Select the appropriate input on the receiver

(page 58).

• Set your TV to the appropriate input mode.
• Move your TV away from the audio

components.

• Assign the component video input

correctly.

• The input signal should be same as input

when you are up-converting an input
signal with this receiver (page 41).

Video

continued

Advertising
Ce manuel est liée aux produits suivants: