Samsung LE32A569P4M - Manuel (Page 41)

Selecting a Teletext Language
You can set the Teletext language by selecting the language type.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Teletext Language”, then press the
ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
English is the default in cases where the selected language is unavailable
in the broadcast.
4. Press the EXIT button to exit.
➣
Selecting a Preference Language
This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language,
Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language.
Using this feature, users can select one of the languages. The language selected here is the default when the user selects
a channel.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Preference”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select required menu (Primary Audio Language,
Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle
Language, Primary Teletext Language, Secondary Teletext Language).
Press the ENTER button.
4. Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER button to confirm your choice.
5. Press the EXIT button to exit.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the
Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages
supported by the current channel and the selection is highlighted. If you change this language setting, the new
selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle
Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.
➣
➣
English - 9
Setting the Light Effect (depending on the model)
You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles
your eyes.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Light Effect”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Off”, “In Standby”, “In Watching TV” or
“Always”.
Press the ENTER button.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
In Watching TV: Turns the LED on while watching TV.
Always: LED is always on.
•
•
•
•
Set the “Light Effect” to “Off” to reduce the power consumption.
4. Press the EXIT button to exit.
➣
Setup
Teletext Language : ----
Preference
Light Effect : In Watching TV ►
Wall-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Software Upgrade
Common Interface
Setup
Parental Lock
Subtitle
Teletext Language : ---- ►
Preference
Light Effect
: In Watching TV
Wall-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Setup
Subtitle
Teletext Language : ----
Preference ►
Light Effect : In Watching TV
Wall-Mount Adjustment
Melody : Off
Entertainment : Off
Energy Saving : Off
PIP
Software Upgrade
LED
BN68-01409H-00ENG.indb 39 2008-04-28 �� 5:18:27