Samsung LNT1953HX-XAA - Manuel (Page 57)

English - 
how to adjust the Stand
. Place the front of the TV onto a soft cloth
or cushion on a table as in Figure (1).
- Align the TV bottom along the table
edge.
. Press on the center of the TV back.
Adjust the stand as in Figure (2) while
pressing the button on the back of the
stand.
. Place the TV on the table so that the TV
sits safely.
When you adjust the stand, press the button on the back of the stand.
. Figure (1) shows the adjustment angle (-2°~14°) when you use the LCD on its stand.
Excessive tilting can turn the LCD TV over which may cause damage.
. Figure (2) shows the adjustment angle (14°~80°) when you convert the LCD from stand-based use to wall-mount.
. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.
You will hear a “Click” sound when changing the angle from 1 to 2 or 3 to 2.
Wall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on installing the Wall
Mount, see the instruction in the Wall Mount items. Contact a technician for installing the wall bracket. Samsung Electronics is not
responsible for any damage to the product or injury to yourself or others if you choose to install the TV on your own.
. Place the TV face down on a soft cloth or
cushion on a table.
. Adjust the stand, pressing the button on the
back of the stand.
. Align the mounting interface pad (not supplied)
with the holes in the stand bottom and secure
it with the four screws that come with the arm-
type base, wall mount hanger or other bases
(not supplied).
. When installing the TV on the wall without using
the stand, insert decoration covers into the
holes as described in the picture (1).
. After inserting the decoration covers, fasten
them with 4 screws as described in the picture
(2).
(  ) (  )
Button
how to adjust the angle of the tV
(  ) angle adjustment when using the
tV on its stand.
(  ) angle adjustment when converting from
Stand to Wall mount (1→3, 3→1)
(  ) angle adjustment when lCd
tV is wall-mounted
Installing the wall mount Kit
Installing VESa compliant mounting devices
(  ) (  )
Button
mounting pad
(Sold separately)
using the decoration Covers
(  ) (  )
BN68-01184A-Eng.indd 55 2007-02-13 �� 1:34:57