Samsung LN37A450C1DXZA - Manuel (Page 20)

English - 18
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 14~15). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna from
the back of the TV.
2. Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
3. Connect an RF Cable between the
ANT OUT terminal on the VCR and
the ANT IN terminal on the TV.
4. Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN 1 [Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
5. Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
If you have a “mono”(non-stereo)
VCR, use aY-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does
not match the color of the video cable (Yellow).
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture when compared to the regular Video connection above.)
1. To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
2. Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the AV IN 2
[S-VIDEO] jack on the TV.
3. Connect Audio Cables between
the AUDIO OUT jacks on the VCR
and the AV IN 2 [R-AUDIO-L]
jacks on the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
Video Connection
S-Video Connection
ANT IN
VCR Rear Panel
Video Cable (Not supplied) 4
Audio Cable (Not supplied) 5
RF Cable (Not supplied) 3
TV Rear Panel TV Side Panel
VCR Rear Panel
RF Cable (Not supplied) 1
Audio Cable (Not supplied) 3
TV Rear Panel
S-Video Cable (Not supplied) 2
TV Side Panel
BN68-01395A-Eng-0202.indd 18 2008-02-20 ¿ААь 6:11:40