GE GCG1580RSS - Manuel (Page 3)

TOOLS REQUIRED
•Level
•Phillips screwdriver
•Pliers
•Gloves
•Measuring tape
MODELS AVAILABLE
GCG1580 SS
GCG1500 BB
GCG1500 WW
GCG1700 II*
ZCGS150 SS
ZCGP150 II*
*For ZCGP150 II and GCG1700 II, also refer
to the instructions provided on the template
packed with those models.
3
Design Information
PRODUCT DIMENSIONS AND CLEARANCES
34” (86.4 cm)
to
35” (88.9 cm)
15”
(38.1 cm)
min.
24”
(61 cm)
min.
Locate the outlet 18” (45.7 cm) min. from the
floor, 3” (7.6 cm) min. from either side
33-3/4”
(85.7 cm)
min.
to
35” (88.9 cm)
max.
14-7/8” (37.8 cm)
23” (58.4 cm)
• Allow 23 ″ (58.4 cm)
clearance at the front for
a full drawer opening.
• Allow 6 ″ (15.2 cm)
clearance on the right
side to the nearest
vertical wall or cabinet
for bag removal.
• Note: This compactor is
designed for built-in
applications only.
All parts are located in a package inside the drawer.
To order additional parts, call 800.626.2002 or visit
GEAppliances.com in the United States. In Canada,
call 1.800.561.3344 or visit www.GEAppliances.ca.
PARTS SUPPLIED
• 6 mounting screws,
#8 x 11/16" (1.8 cm) long
• 2 side-mounting clips
• Door toekick
• Top toekick
• Base toekick
• 2 countertop retaining
brackets
• 8 Toekick screws,
#8 x 5/16" (0.8 cm) long
• 4 White mounting
screws, #8 x 11/16"
(1.8 cm) long
Additional parts for ZCGS150SS and ZCGP150II